|
GO-DEVIL LONGTAIL PROPELLERS (See below for Surface Drive Propellers)
The Original Shallow Water/Weedless Prop! The GO-DEVIL Propeller is the most refined propeller on the market. With over 25 years of testing in harsh conditions, our props are designed to get you out of those sticky situations. Through the years, many companies have tried to build knock-offs of the GO-DEVIL propeller. None have proven to be as efficient, durable, and powerful as the GO-DEVIL propellers...Period. We've tested these so called "copies" to see how they compare with our own. In our testing, we have seen GPS speeds on average of one to two mph less than the GO-DEVIL propellers along with extremely poor performance in rough terrain and mud. Our props, to say the least, have been copied by many and perfected by none! Along with unmatched performance, No other propeller in the industry is backed by a warranty of its kind. Read below to find out more about our prop warranties.
The secret to our props are in the years of testing and resarch that no other company has done.
GO-DEVIL Props are field tested on each of our models in every environment imaginable. Our props are put to the test, then modified through an interactive procedure until a finite maximum for performance in all applications is reached. After rigorous testing is complete, a prototype is custom made by hand, scanned, and finessed on the computer to the tightest tolerances for the final product.
Go-Devil recommends that large and heavy boats should drop one inch of pitch. Altitudes above 3000 ft should drop at least one inch of pitch to accommodate for horsepower loss. Go-Devil will change pitch or re-cup propellers for a $20 charge at any time.
7x5 GO-DEVIL PROPELLER
-STAINLESS STEEL
-NOT AVAILABLE WITH CUP
-SUPER WEEDLESS
-USED ON THE FOLLOWING
GO-DEVIL ENGINES:
5.5 hp Honda
6.5 hp INTEK Pro
-WARRANTY (see below)
-PRICE: $185
|
7x5 GO-DEVIL Prop (shown) |
| 8x4 GO-DEVIL PROPELLER
-STAINLESS STEEL
-NOT AVAILABLE WITH CUP
-SUPER WEEDLESS
-USED ON THE FOLLOWING
GO-DEVIL ENGINES:
8 & 9 hp Briggs & Straton
9 hp Honda
-WARRANTY (see below)
-PRICE: $210
|
8x4 GO-DEVIL Prop (shown) |
| 9x3, 9x4, 9x5, 9x6, 9x7 GO-DEVIL PROPELLER
-STAINLESS STEEL
-AVAILABLE WITH HEAVY CUP
-OUTPERFORMS ALL PROPS IN THE MUD
-SUPER WEEDLESS
-USED ON THE FOLLOWING
GO-DEVIL ENGINES:
9x3 - 16 hp Vanguard
9x4 - 18 hp Vanguard, 20 hp Honda
9x6 - 23 hp Vanguard, 24 hp Honda, 25 hp Kohler
9x7 - 27 hp Kohler
-WARRANTY (see below)
-PRICE: $225
|
9x7 GO-DEVIL Prop (shown) |
| 10x5, 10x6, 10x11 GO-DEVIL PROPELLER
-STAINLESS STEEL
-AVAILABLE WITH HEAVY CUP
-SUPER WEEDLESS
-USED ON THE FOLLOWING
GO-DEVIL ENGINES:
10x9 - 9 hp Honda Crawfish Model with Clutch
10x6 - 31 or 35 hp Vanguard
-WARRANTY (see below)
-PRICE: $245
|
10x11 GO-DEVIL Prop (shown) |
GO-DEVIL SURFACE DRIVE PROPELLERS
The GO-DEVIL Surface Drive propeller was specially designed for Surface Drive engines. We tested propellers extensively during our long research and development period. With over 100 changes to the design during this period, we produced the most refined propeller for the surface drive engines. The surface drive propeller is extra heavy built, full weedless, and designed with a high performance cup to power through the nastiest, thickest mud for a wide spectrum of boats and loads. A computer designed and machined mold allows for highly consistent propellers so that our customers obtain the maximum performance matched to these engines. On our larger engines, such as the 25 hp through 27 hp, we run a 12” propeller capable of producing the maximum thrust. On our 31-35 hp we run our new 11" 3-blade prop. On our smaller engines, an 11” propeller will maximize the available horsepower. Smaller diameter propellers for the surface drive engines were rigorously tested; however, they were outperformed by the larger diameters. Our surface drive propellers are made of a high grade stainless steel and are purposefully thick to ensure longevity because propeller wear on surface drives engines create a significant reduction in performance as compared to factory propellers.
| 11x10, 12x12 GO-DEVIL SD PROPELLER
-STAINLESS STEEL
-HEAVY CUP
-SUPER WEEDLESS
-EXTRA THICK
-USED ON THE FOLLOWING
GO-DEVIL ENGINES:
11x11 - 18 hp through 23 hp
12x12 - 25 hp through 27 hp
-WARRANTY (see below)
-PRICE: $235 for 11x11, $245 for 12x12
|
12x12 GO-DEVILSD Prop (shown) |
11" 3-BLADE PROP
-STAINLESS STEEL
-HEAVY CUP
-SUPER WEEDLESS
-EXTRA THICK
-USED ON THE FOLLOWING
GO-DEVIL ENGINES:
11" 3-BLADE PROP - 31hp 35 hp & 23hp
-WARRANTY (see below)
-PRICE: $260 |
 |
GO-DEVIL PROPELLER WARRANTY
The Go-Devil propeller is warranted against breakage within two years of the purchase date with the following conditions:
Example: A 9" propeller that cost $225.00 is broken and has worn down to 8 1/2 " diameter, the customer will pay $112.50 (50%) for a replacement under warranty. Replacement propellers carry a one year warranty. Go-Devil propellers that have been rebuilt carry no warranty. Go-Devil propellers used in rocks are not warranted unless a rock guard has been installed.
ALL PROPELLERS WILL BE BILLED IN FULL UPON SHIPMENT AND A CREDIT ISSUED AFTER INSPECTING RETURNED BROKEN PROP!
| Inches Worn |
Amount of Credit |
| 1/8 inch or less |
Customer pays 15% |
| 1/4 inch |
Customer pays 25% |
| 1/2 inch |
Customer pays 50% |
| 3/4 inch |
Customer pays 75% |
| 1 inch |
No Credit |
|
|
|
HOME
